|
|
|
POPULAR PRODUCTS
|
|
A 1U cable manager, constructed using mild steel and finished in powder coated black |
|
A Class "0" fire rated matting, available in different widths and thicknesses.
Installed directly on the builders slab or within cable basket along the cable route, reducing the likelyhood of indentation or chemical impregnation.
From £19.09 £22.91 (incl VAT)
|
|
|
|
A range of 19" horizontal metal powder coated (RAL7044) PDU's with conventional uk sockets. Provided with or without a switch with a variety of lead lengths & plug types. All units are individually tested and provided with earth studs safety labels etc
From £25.00 £30.00 (incl VAT)
|
|
|
|
Low smoke, zero halogen expandable polyester braided sleeve that provides thermal and mechanical protection for it's contents. Ideal for dressing cabling inside cabinets providing added thermal and mechanical protection.
From £14.00 £16.80 (incl VAT)
|
|
|
|
Mild steel construction with powder coated black finish. Four LJ6C holes for data modules and 25mm conduit entry.
Can be constructed for any size data outlet module. |
|
25m of fibrous hook and loop material, ideal for securing cabling bundles without over tightening, full re-usable.
From £9.00 £10.80 (incl VAT)
|
|
|
|
Consists of an outer flange and a two part insert. The outer flange fits into an 95mm hole. Cables are then passed through and the insert fitted with the appropriate extent of slot revealed
Standard Colour : Grey or Black
|
|
An adjustable heavy duty shelf made from sheet metal, available in Sheet metal, powder coat black or beige (RAL7044) finish, provided with cage nuts for fixing. Uses the rear profile mounts on cabinets to provide a sturdy fixing, for mounting even the heaviest of objects. |
|
Consists of an outer flange and a two part insert. the outer flange fits into an 127mm hole. Cables are then passed through and the insert fitted. Available with either three holes of a slot.
Standard Colour : Grey or Black
|
|
An "L" shape bracket with a slotted hole and cable tie fixing position . Safer than most with a folded top.
From £1.50 £1.80 (incl VAT)
|
|
|
|
All our range PDU's are available in Black, more popular for home, television or audio related installations. The following range of Black PDU's are available direct from stock, all other PDU's are available in Black, but on a sightly longer leadtime.
From £30.00 £36.00 (incl VAT)
|
|
|
|
Ideal for sub floor installations this box allows for a most standard 1U devices to be installed. The box is constructed of powder coated steel 504mm x 80mm x 126mm both end and the top of the box can be removed. |
|
A corrigated flexible black conduit, available in a variety of sizes and lengths. Glands and locknuts are available for all sizes. The conduit is also available in a split form for retrofit.
Also available in coloured form - yellow, green, blue, red, white, grey and orange.
From £2.50 £3.00 (incl VAT)
|
|
|
|
An easy fit 1U plastic cable manager - provides a very aesthetically appealing finish to any cabinet with minimal installation time.
Fits almost all standard 19" racks. |
|
1U mild steel strip finished in powder coat black, the finishing touch to an installation. |
|
19mm wide PVC tape on a 33 metre reel, available in a wide variety of colours. |
|
Nylon cable ties in a wide range of sizes, a cheap and effective way of bundling cables together.
From £0.30 £0.36 (incl VAT)
|
|
|
|
The air-guard GTAG1 provides a cableway 230 x 65mm and assists optimising the thermal management of the data room plenum through the raised floor installation. This device has a removeable section to allow easy cable release. |
|
1U mild steel panel with letter box brushing, to pass cables and leads through to the back of the installation, while giving an aesthetically pleasing look to the cabinet. |
|
The air-guard GTAG2 provides a maximum cableway 180 x 120mm through an upper brush and lower gasket section. It fits into a 230 x 175mm opening in the raised floor. The unit comes with a safety cover which can be removed when cables are installed. |
|
The air-guard GTAG3 provides a cableway 200 x 200mm. Unlike the GTAG1 this unit sits upon the raised floor so is ideal when retrofitting existing holes upto 200 x 200mm. This unit can also be use as two seperate perimeter seals.
|
|
1U finger trunking mounted onto a sheet metal strip with powder coat black finish. Tidy way to manage cables and help with installations. |
|
Excel patch panels comply with the latest EIA TIA standards for enhanced Cat 5 installations. Each panel is provided with optional labelling systems. Krone tools can be used on the well space IDC blocks at the rear.
From £35.00 £42.00 (incl VAT)
|
|
|
|
A lilac coloured Cat 5e low smoke zero halogen data cable supplied in easy dispensing boxes. Cable provided with 1m markers from 305m down. Satisfying ISO11801 & EIA/TIA 568A. |
|
Set of 50 cage nuts, with 50 cup washers and screws. 0.9 to 1.6mm suitable for most cabinets - 1.7 and 2.5mm for cabinets with thicker steel |
|
An Excel Unshielded Cat 5e LJ6C sized Data Module 2 piece design, verified to attain Cat 5e standard. |
|
A handy higher class insertion tool made from aluminium. By simple operation of a lever allows the insertion of a standard cage nut used in data cabinets and other data related products.
A simpler lever style tool can be found in this section. |
|
Made from formed sheet metal, tempered into a flexible lever to help insert cage nuts into cabinets, and to aid removal.
A higher quality pincer style tool can also be found in this section |
|
This is a simple but effective method of securing and locking any lid, providing lockable trunking lids - The bracket is in two parts and requires only two holes to be drilled in the trunking for fitment. Any lock with a 4mm shank can be used.
More than one may be required per installation. |
|
|
|
|
|
