|
|
|
NEW PRODUCTS
|
|
For location on a desk or counter. Designed to allow one patchcord through & to house the patchcord before use. The grommet lid has a clip on the underside that allows the patchcord to be hooked on. The grommet requires a 30mm diameter hole and can acommodate a solid 25mm conduit for a fixed installation if required. Ideal for chip and pin installations.
|
|
A low smoke zero halogen ( LSOH ) cable mat similar to the Class "O" alternative but with different properties, again ideal for protecting your cable on a builders slab.
From £210.00 £246.75 (incl VAT)
|
|
|
|
7 Way Inward Facing ( back to front ) Switched PDU, when mounted from the outside it looks like a 2U Blank Panel. Complete with a 13Amp 3m lead.
|
|
A cat 5e through coupler panel providing RJ45 in and RJ45 out. 1U and 2U dependant upon the port count.
From £42.50 £49.94 (incl VAT)
|
|
|
|
A versatile budget wall cabinet providing lockable reversable glass door with quick release hinges for easy removal. Fully adjustable 19" mounting angles. Removable lockable side panel and apertures for cable entry at rear, top and bottom.
From £64.68 £76.00 (incl VAT)
|
|
|
|
An adjustable heavy duty shelf made from sheet metal, available in Sheet metal, powder coat black or beige (RAL7044) finish, provided with cage nuts for fixing. Uses the rear profile mounts on cabinets to provide a sturdy fixing, for mounting even the heaviest of objects.
|
|
A rigid welded construction side and front entry wall box. Provided with a glazed door on the left hand side exposing 6U of vertically mounted 19" profile. A solid front door reveals a lower storage area and allows access to the rear. This cabinet although only 300mm deep provides 455mm behind the 19" profiles and is ideal for office style installations.
£185.00 £217.38 (incl VAT)
|
|
|
|
12 Way Inward Facing ( back to front ) Switched PDU, when mounted from the outside it looks like a 1U Blank Panel. Complete with a 13Amp 3m lead.
|
|
The air-guard GTAG1 provides a cableway 230 x 65mm and assists optimising the thermal management of the data room plenum through the raised floor installation. This device has a removeable section to allow asy cable release.
|
|
All our PDU's are available with C14 plugs at an additional cost - please select to view a limited range kept in stock.
From £36.00 £42.30 (incl VAT)
|
|
|
|
The air-guard GTAG3 provides a cableway 200 x 200mm. Unlike the GTAG1 this unit sits upon the raised floor so is ideal when retrofitting existing holes upto 200 x 200mm. This unit can also be use as two seperate perimeter seals.
|
|
Ideal for sub floor installations this box allows for a most standard 1U devices to be installed. The box is constructed of powder coated steel 504mm x 80mm x 126mm both end and the top of the box can be removed.
|
|
A 2.5 metre extension lead (3 core 1.5mm^2) for C19 to C20.
|
|
Heavy duty wall box with 24 LJ6C sized holes for data modules to be fitted. Easy installation and fitting. Requires cable entry point to be formed on site. Alternative outlet apperture sizes available.
|
|
This box has been designed to accept 2 x LJ6C outlets and provides a lockable lid. Patch leads can be left in situ through two slots in the box and the lid can be locked in place after the patchleads have been installed, if required.
|
|
|
|
|
|
Terms & Conditions | Privacy
Site Map |
|
 |
© Copyright 2006-2008 IntroDelta Limited. All rights reserved.
IntroDelta: Suppliers of data and communication products including cable management, data cabinets, pdu's, braided sleeve, cable matting, flexible conduit, data boxes and floor grommets.
